Menu
This product is a new generation of USB 3.2 & USB 3.0 extender, can extend the USB 3.2 & USB 3.0 data up to 100m/330ft
via a single Cat 6a/7 F/FTP or U/FTP cable.
| Input/Output Port | Transmitter: 1 x USB HOST (USB Type-B); 1 x RS232 &FSYNC (3.5mm, 4-Pin Phoenix Connector); 1 X USB3-LINK(RJ45); 1 x POWER; 1 x FW (Micro-USB) |
|---|---|
| USB Standard | USB 3.2 Gen1, and backward compatible with USB 3.0, USB 2.0, and USB 1.1 standards |
| Data Rate | Up to 5Gbit/s |
| Operating Temperature | 0°C to 45°C (32°F to 113°F) |
| Storage Temperature | -20°C to 70°C (-4°F to 158°F) |
| Humidity | 10% to 90%, non-condensing |
| ESD Protection | Human-body Model:±8kV (Air-gap discharge)/±4kV (Contact discharge) |
| Power Supply | 20V 3A |
| Power Consumption (Max) | 31.28W (Pair, USB fully loaded) |
| Device Dimension (W x H x D) | Transmitter/Receiver: 150mm x 20.5mm x 100mm /5.9” x 0.81” x 3.94” |
| Product Weight | Transmitter: 0.35kg/0.77lb Receiver: 0.34kg/0.75lb |
1. Supports USB 3.2 Gen 1 standard, and backward compatible with USB 3.0, USB 2.0, and USB 1.1 standards.
2. Supports up to 5Gbit/s data transmission rate.
3. Supports transmitting USB signal up to 100m/330ft via a signal Cat 6a/7 F/FTP or U/FTP cable.
4. Pure hardware architecture is compatible with Control / Bulk / Interrupt /Isochronous transmission protocols.
5. Provides four USB 3.2 & 3.0 device ports on the receiver, includes one 1.5A port for connecting high-power USB devices.
6. Occupies one USB hub tier and supports connecting additional USB hub devices.
7. Supports RS232 and FSYNC GPIO pass-through for industrial camera control.
8. Plug and play, no driver is required, and compatible with multiple operating systems.
9. Support firmware upgrading via micro-USB port.
10. Built-in two-way PoH + modules, only needs to be connected to one power adapter to the transmitter or receiver to power both units.
China First 7-Day Delivery.
We will contact you within 1 working day, please pay attention to the email with the suffix “@leyedisplay.com”.
